Applicable fluid:STEAM
Applied pressure:63 bar
Applicable fluid temperature:400℃
Connection method:screwed
TDK 71 Steam Trap internal parts are made of stainless steel and body is made of stainless casting. In every condition the maximum back pressure will not exceed 80% of inlet pressure. If not the trap will not function properly. TDK 71 simply discharges in relation to condensate level. Strainer is easy to clean as it a Y-type located in lower part of body. It can be installed in both horizontally and vertically; however, it is recommended to install in horizontal pipelines.
Applicable fluid:water, liquid
Applied pressure:1.0Mpa or less
fluid temperature:80℃ or less
Connection method:KS 10F FF FLANGE
texture:Body: GC200
Disc, Seat : EPDM, CAC406
GASKET: NBR, EPDM
Body pressure test:1.5Mpa
Applicable fluid:Fresh water, industrial water, agricultural water
1st applied pressure:Nominal diameter 200 to 250 : 0.05 to 0.69 MPa
Nominal diameter 300 to 400 : 0.05 to 0.34 MPa , 0.29 to 0.69 MPa
Applicable fluid temperature:80℃ or less
Connection method:KS 10K RF FLANGE
texture:Body: GC200
Disc, Seat : NBR, CAC406
Diaphragm: NBR
Body pressure test:Water pressure 1.5MPaoption:Body: GC200
Disc, Seat : NBR, CAC406
Diaphragm: NBR
Hammerless Check Valve YHL-100
Applicable fluid:water
Maximum operating pressure:1.0Mpa or less
Applicable fluid temperature:5~80℃
Connection method:KS 10K RF FLANGE
texture:Body: GC200
disk: NBR, CAC406
sheet: CAC406
Body pressure test:Water pressure 2.0Mpa
Applicable fluid:Sat, Steam, Superheat Steam, Oil, Water, Gas
working pressure:1.0, 2.0, 3.0Mpa
Applicable fluid temperature:250℃ (order over 250℃ separately)
texture:본체 : CAC304, STS, SPPS, SCPH2, GCD
볼 : STS, SC480
PACKING : Grafoil (SI NO.700)
maximum angle of displacement:15 ~ 30°
Applicable fluid:Sat, Steam, Superheat Steam, Oil, Water, Gas
working pressure:1.0, 2.0, 3.0Mpa
Applicable fluid temperature:250℃ (order over 250℃ separately)
texture:Body : CAC304, STS, SPPS, SCPH2, GCD
SLEEVE : CAC304, STS, SC480
PACKING : Grafoil (SG NO.800)
Applicable fluid:Sat, Steam, Superheat Steam, Oil, Water, Gas
working pressure:1.0, 2.0, 3.0Mpa
Applicable fluid temperature:250℃ (order over 250℃ separately)
texture:Body : CAC304, STS, SPPS, SCPH2, GCD
SLEEVE : CAC304, STS, SC480
PACKING : Teflon + Grafoil (SI NO.800)
Applicable fluid:Sat, Steam, Superheat Steam, Oil, Water, Gas
working pressure:1.0, 2.0, 3.0Mpa
Applicable fluid temperature:250℃ (order over 250℃ separately)
texture:Body : CAC304, STS, SPPS, SCPH2, GCD
SLEEVE : CAC304, STS, SC480
PACKING : Grafoil (SI NO.800)
Applicable fluid:water
Set pressure range:0.1~1.0MPa
Applicable fluid temperature:100℃ or less
Connection method:Inlet: KS B 6216 10K RF FLANGE
Outlet: INLET 10, 20, 30K RF FLANGE
texture:Body: GC200 Disc, Seat
: STS304, SSC13
Body pressure test:1.1 times the applied pressure of the pneumatic flange
Applicable fluid:Fresh water, industrial water, agricultural water
Applied pressure:1.0Mpa or less
Minimum differential pressure before and after the valve:0.05Mpa
Applicable fluid temperature:5-80℃
Connection method:KS 10K RF FLANGE
texture:Body: GC200
Disc, Seat : NBR, CAC406
Diaphragm: NBR
Body pressure test:Water pressure 1.5Mpa
Applicable fluid:Sat, Steam, Superheat Steam, Oil, Water, Gas
working pressure:1.0, 2.0, 3.0Mpa
Applicable fluid temperature:250℃ (order over 250℃ separately)
texture:Body : CAC304, STS, SPPS, SCPH2, GCD
SLEEVE : CAC304, STS, SC480
PACKING : Grafoil (SI NO.800)
Applicable fluid:Drinking water, fresh water, industrial water, agricultural water
Applied pressure:1.0Mpa or less
Minimum differential pressure before and after the valve:0.034Mpa
Applicable fluid temperature:5-80℃
Connection method:KS PT SCREW
texture:Body: GC200 Disc, Seat : NBR, CAC406
Body pressure test:Water pressure 1.5Mpa
Pressure reducing valve YAWR-1
Applicable fluid:Fresh water, industrial water, agricultural water
1st applied pressure:Up to 1.0 MPa
2nd applied pressure:Nominal diameter 200 to 250 : 0.05 to 0.69 MPa
Nominal diameter 300 to 400 : 0.05 to 0.34 MPa , 0.29 to 0.69 MPa
Minimum differential pressure before and after the valve:0.05Mpa
Maximum decompression ratio:10:00 am
Applicable fluid temperature:5~80℃ or less
Connection method:KS 10K RF FLANGE
texture:Body: GC200
Disc, Seat : NBR, CAC406
Diaphragm: NBR
Body pressure test:Water pressure 1.5MPa
